Who is this article for?

Administrators responsible for Maximum Allowable Quantity (MAQ) management.

Administrator role is required.

Once you've added a control group type, you need to define hazard limits associated with it to allow for Maximum Allowable Quantities (MAQ) monitoring.

This article explains where you can configure these.

1.  Configuring control limits

To configure control limits:

1. Open Administration.
2. Select Data Manager.
3. Switch to the Group Area Types tab.
4. Click Control next to a control group.

5. Click Add New Control Limit.

6. Select a Hazard Category.
7. Choose a Hazard Class.

If no options show up in the dropdowns, contact our Support team for help with populating these.

8. Set a Physical State.
9. Define a Threshold.
   This is the maximum quantity allowed.
10. Set Hazard Control Level as Percentage Adjust modifier.
    This will adjust the total actual limit of the group in relation to the defined threshold.

Further reading

• Adjusting hazard control limits